-------------- Legal Notices -------------- ©2019 Siemens Product Lifecycle Management Software Inc. All Rights Reserved Software, file formats, and audiovisual displays may be used pursuant to the applicable Software License Agreement and contain confidential and proprietary information of Siemens Product Lifecycle Management Software Inc.; which is protected by copyright and trade secret law. Such materials may not be reproduced or transferred to other documents or used or disclosed to others for manufacturing or for any other purpose except as specifically authorized within the terms of the Software License Agreement, or as specifically authorized in writing by Siemens Product Lifecycle Management Software Inc. Siemens Product Lifecycle Management Software Inc. 5800 Granite Parkway Suite 600 Plano, TX. 75024 -------------------- End of Legal Notices -------------------- -------------- Release Notes: -------------- Microsoft Installer (MSI) Maintenance Pack Solid Edge 2019 (V219) Version: 219.00.06.04 Solid Edge 2019 Maintenance Packs will be available to address CRITICAL items thru the year following the release. The release date for Solid Edge 2019 was 06/25/2018. Therefore, the Solid Edge 2019 Maintenance Pack cutoff date is 12/31/2019. Teamcenter Integration for Solid Edge (SEEC) - If you have installed the Solid Edge 2019 SEEC Admin from the Full Product download area, Teamcenter_Integration_for_SE_Admin_2019.zip, please install the updated SEEC Admin product, SEECAdministratorV219_MP1.zip from the Solid Edge Product Update area to ensure you have the changes made to support MP1. Beyond the MP1 install, no further SEEC Admin updates are required with this MP release. Solid Edge Portfolio Products - When you download an MP for a Solid Edge Portfolio product such as Technical Publications, Modular Plant Design, Electrical, and so on, you should also install the related base Solid Edge MP. At times a change is required in both the base product and portfolio product to address a software issue. Microsoft Windows 10 releases Feature Updates every six months. Microsoft does not use Windows 10 Feature Updates as an avenue to deliver security-related patches. All quality-related patches, including security and reliability hot-fixes, will continue to be delivered outside of this Feature Update process. Therefore, if your production use of Solid Edge was negatively impacted as a result of the last Microsoft Windows 10 Feature Update, you should consider configuring your Windows 10 machines to delay the deployment of Windows 10 Feature Updates. Configuring your Windows 10 machines by moving the machines into the "Semi-Annual Channel" servicing channel will delay the installation of Feature Updates for approximately four months following the initial release. During this time, you and your IT organization will have the opportunity to review the suitably of the Feature Update, including determining any negative impact, upon the applications that you use in your production environment, such as Solid Edge. This four-month window of time between Microsoft initially releasing the Feature Update to targeted machines and releasing the Feature Update for general deployment to the enterprise will also provide our development team time to review and react to changes introduced by Windows 10 Feature Updates, thereby helping keep you as productive as possible.  -------------------- End of Release Notes -------------------- ------------------- Installation Notes: ------------------- • MSI Product Updates can be applied on top of the base release and or existing Product Update with a lesser version. • MSI Product Updates are all inclusive, i.e. fixes delivered in MP3 include all fixes delivered in MP1 and MP2. • MSI Product Updates calculate free disk space before installing. Please note that there have been cases where the Disk Space Computation takes several minutes to complete. Please be patient. • MSI Product Updates can be uninstalled without having to remove the base Solid Edge product. • Uninstalling a MSI Product Update will restore the installation to the state before the Product Update was applied. • PLEASE NOTE: When uninstalling a MSI Product Update, the original source media and the previous Product Update package, if any, must be available to allow the recovery of previous file versions. • The current MSI Product Update will be the only Update listed and available for uninstallation. After the current Update is uninstalled, the previous Update will become the current Update, if there were multiple Updates installed. • MSI Product Updates are uninstalled via the Control Panel (Uninstall a program –> View installed updates -> Uninstall). Silent MSI MP Install: Solid_Edge_MSI_MP1.exe /s /v"/qn /L*v %TEMP%\mysilentupdate.log" “/s” is an InstallShield switch that makes the InstallShield EXE run silent. “/v” is an InstallShield switch that passes the string following it in quotes to the wrapped MSI “/qn” The “q” sets the UI level of the MSI and the “n” is it’s option for “No UI” Be careful attempting to output a log file as MSI will not create directories if they don’t exist. So, if you want to create a log file set your path to a directory that exits or to “%TEMP%\mysilentupdate.log” as “%TEMP%” is an environment variable which translates into “c:\users\yourusername\local\appdata\temp”. ------------------- End of Installation ------------------- ---------------------------------------------- PRs Resolved in Solid Edge 2019 MP6 (v219 MP6) ---------------------------------------------- ===General=== PR 9261665: Engineering reference, Gear design update problem PR 9280124: Lower graphic card performance on "Tools" ribbon PR 9311226: Poor performance when checking out a floating license with options ===API=== PR 9398903: Parts being placed in the wrong position during reorder ===Assembly=== PR 9350209: Solid Edge is crashing while running route by part command PR 9363289: Failed to extend/trim the highlighted frame component(s) using the selected tool PR 9391936 : Flickering when zooming in sketch edit in place in assembly PR 9376223 : Assembly File repair SE2019 MP4 request - SE is crashing after save attempt PR 9402256: “SE Graphics Test 1" performance test is not running thru completion PR 9405618: frames get messed up after updating ===Draft=== PR 9327095: Dimensions on a sketch disappear when you select a design object, and RMB show only PR 8393282: added hole gets new hole number although size already exists PR 8952766: User wants to skip 'define hole table origin' step during placement of new hole table PR 9382515: Drawing View Wizard Option Crashes session ===Part/Sheet Metal=== PR 9173544: Problem with optimized geometry after optimize PR 9291277: Save as flat DXF options unchecked " Complex Hole" gives wrong result PR 9357495: Part file crashes while saving in sketch environment PR 8389690: Region created from sketch with gap PR 9352716: Move command, as part was moving to a distance double of the dragged distance PR 9389334: Old generated closed corners cause failure in SE2019 PR 9325163: Abort when trying to move faces in Sync.env PR 9397714: Construction body fails after linking the material in a design body part copy PR 9403379: Solid Edge closes after editing pattern in assembly ===Translators=== PR 8551634: NX open the JT exported from SE, and the location of PMI dimension is wrong PR 9304109: Unable to open SolidWorks file PR 9343819: Not possible to open step file correctly parts missing PR 9354990: Unable to save as DWG ===Data Management=== PR 9351345: Document controllers ignored, only first one can set data obsolete ===Teamcenter Integration for Solid Edge=== PR 9227116: LOV value will disappear when saving a new file PR 9339858: Dynamic LOVs not working PR 9343658: Teamcenter 12.1 Standard part ignores naming rule PR 9342992: Assembly JT creation was very slow when wire harness is present PR 9371297: Error on first Save to Teamcenter of drawing or assembly from active SE 2019 Part Tim - PR 9375450: User must run the Replace Part command twice to successfully replace the part PR 9383281: Solid edge is crashing randomly PR 9387708: AddToTeamcenter does not start import of the file if manifest file exists in the directory PR 9240326: BOM line error with adjustable assembly PR 9394831: Project removed when revise via Structure-Editor ===TechPub=== PR 9304665: Line Break in Illustration description not correct in HTML PR 9330815: The "Isolate and Zoom" button cannot be activated in the PDF file PR 9331438: 3D models are sometimes displayed incorrectly in the PDF file PR 9355213: 3DPub and Illustrations: garbage square after FOA file name in model panel --- End ---